PandaTool一键发币
🇺🇸_English
🇺🇸_English
  • 🐼Introduction
  • 📞Connect
  • 🧭Navigation
  • 💸Tools Fee
  • ⛓️EVM Create Token
    • 1️⃣Create standard ERC20 or BEP20 token Guide
    • 2️⃣Holders Dividend Token Creation Guide
    • 3️⃣LP Reflection Token Ceration Guide
    • 4️⃣LP Reflection Pro Token Ceration Guide
    • 5️⃣Burning Reflection Token Ceration Guide
    • 6️⃣ERC314 Protocol Token Creation Guide
    • 7️⃣Holders Interest Token Creation Guide
    • 8️⃣Holders Reflection Token Creation Guide
    • 9️⃣Reserve Burn Token Creation Guide
    • 🔟LP Mining Token Creation Guide
  • 🛠️Solana Tools
    • ⛏️Solana Token Creator Guide
    • 💊Launch Tokens On PumpFun and Bundle Buys Guide
    • 🔥Guide to Burning LP Tokens on Solana
    • 📤Solana Batch Sender or Airdrop Guide
    • 📥Solana Token Batch Consolidation Guide
    • 🆕Create Solana Tokens Presale and Private Sale Guide
    • 1️⃣Create Solana Raydium Liquidity Pool Guide
    • 2️⃣Add or Remove Liquidity On Raydium Guide
    • 3️⃣Creating OpenBook Market ID Guide(Cheapest)
    • 4️⃣Pump Batch Sell All Tokens Guide
    • 5️⃣Burning Solana SPL Token or LP Guide
    • 6️⃣Set Solana Token Authority: Minting, Freezing, and Removing
    • 7️⃣Solana Tokens Update Metadata Guide
    • 8️⃣Bulk Generation of Solana Wallet Addresses
    • 💸Solana New Address Buy Bot Tutorial
    • 💰Solana Account Rent Recycling Tutorial
    • 📙Solana OpenBook Market ID Query Guide
    • 🆕Solana Guide to Creating Raydium CLMM Pool
  • ⚒️Evm Tools
    • 📤Multi-chain Bulk Token Transfer Tools Guide
    • Bulk Wallet Generator Guide
  • 🎁Create Presale Tools
    • 💁‍♂️Decentralized Mint Presale Creation Guide
    • 🙋‍♂️Liquidity-Backed Mint Presale Creation Guide
    • 🙆‍♂️Donation Presale Creation Guide
  • TON Token Creator
    • TON Token Creator Tutorial
    • Tonkeeper wallet installation tutorial
    • Tutorial on creating liquidity pool on STON.fi
    • Tutorial on creating liquidity pool on DeDust
  • Declaration
    • Terms of Service
    • Disclaimer
Powered by GitBook
On this page
  • LP Reflection Pro Protocol Mechanics
  • LP Reflection Pro Token Creation Steps
  • 1. Wallet Connection (Axperienced users may skip)
  • 2. Parameter Configuration
  • 3. Feature Toggles
  • 4.Console Usage Instructions
  • FAQs

Was this helpful?

  1. EVM Create Token

LP Reflection Pro Token Ceration Guide

LP Reflection Pro adds referral rewards,the referrer can earn the transaction fee of the referee

LP Reflection Pro Protocol Mechanics

LP Reflection

  • Also known as liquidity pool rewarde, LP Reflection means that when users add liquidity on a decentralized exchange (such as PancakeSwap), the addresses that provide liquidity (LPs) directly receive rewarde token incentives.

Key Difference

  • LP Reflection Pro enhances the base LP Reflection model by introducing referral rewards, allowing referrers to earn a percentage of their downlines' trade fees.

Inviter Rewarde

When an upstream user binds to a downstream user by a certain method, the upstream user can receive a reward in the native token equal to a portion of the transaction fee from the downstream user.

To prevent bot activities, the binding process between the upstream and downstream is somewhat complex and requires at least one round-trip transaction to complete.

By default, the upstream user airdrops an arbitrary amount of tokens to the downstream user, and the downstream user must then send back any amount of tokens. Only then is the binding considered successful. If you wish to modify the airdrop/return amount, you can set it in the console.

  • Hierarchical rewards system for upline/downline relationships

  • Anti-bot binding requires 1 complete rebound transaction (downline must return tokens after upline airdrop)

  • Default binding: Any airdrop amount → Any rebound amount

Critical Notes:

  • LP addresses receive reward tokens, referrals earn native tokens(You Cerate Tokens)

  • An address with downlines cannot bind uplines

LP Reflection Pro Token Creation Steps

2.Select the LP Reflection template

3.Connect Wallet

4.Token Parameter Configuration

5.Set up referral rewards

6.Create Contract

7.Setting up token functionality

1. Wallet Connection (Axperienced users may skip)

Step 1 - Network Selection

In MetaMask:

  • Select target blockchain (e.g. BSC for Binance Smart Chain)

  • Switch networks using the network dropdown

Step 2 - Platform Access

Step 3 -Wallet Connection Process

  1. MetaMask pop-up appears → Select desired account

  2. Click "Next" → "Confirm"

  3. Verify connection status via displayed chain name & wallet address

Important Notice: If your Google Chrome has multiple wallet extensions installed (Phantom Wallet, MetaMask, and OKX Web3 Wallet), PandaTool will prioritize connecting to Phantom Wallet by default. To prevent this, temporarily disable the Phantom Wallet extension in your Google Chrome settings.

2. Parameter Configuration

Core Settings

  • Name: Full designation (e.g., Ethereum)

  • Symbol: Ticker (e.g., ETH)

  • Total Supply: Fixed issuance (non-inflationary)

  • Decimals: Default 18 (e.g., 0.000001 = 6 decimals)

Reflection Settings

  • Select Reward: Input contract address of a high-liquidity token.If the liquidity is too low, dividends may not be distributed properly.

Buy Tax (Total <25%)

  • Buy Fund Fee: Each buy transaction deducts a percentage of tokens deposited into the contract address. When the accumulation threshold is reached, these tokens are automatically swapped for USDT (or the base pool token matching your liquidity pool,such as bnb or USDC) and sent to your fundaddress.

  • Buy Reward Fee: Each buy transaction deducts a percentage of tokens deposited into the contract address. When the trigger threshold is met, these tokens are converted into your designated Reward token (e.g., USDT) and distributed proportionally to LP holders.

  • Buy Burn Fee: Each buy transaction deducts a percentage of tokens permanently sent to the Burn Address (0x000...dead) for deflationary removal.

  • Buy LP Fee: Each buy transaction deducts a percentage of tokens deposited into the contract address. Upon reaching the activation threshold, these tokens are automatically paired with the base token to enhance liquidity depth. The generated LP tokens are irrevocably allocated to the fundaddress.

Sell Tax (Total <25%)

  • Sell Fund Fee: Each Sell transaction deducts a percentage of tokens deposited into the contract address. When the accumulation threshold is reached, these tokens are automatically swapped for USDT (or the base pool token matching your liquidity pool,such as bnb or USDC) and sent to your fundaddress.

  • Sell Reward Fee: Each Sell transaction deducts a percentage of tokens deposited into the contract address. When the trigger threshold is met, these tokens are converted into your designated Reward token (e.g., USDT) and distributed proportionally to LP holders.

  • Sell Burn Fee: Each Sell transaction deducts a percentage of tokens permanently sent to the Burn Address (0x000...dead) for deflationary removal.

  • Sell LP Fee: Each Sell transaction deducts a percentage of tokens deposited into the contract address. Upon reaching the activation threshold, these tokens are automatically paired with the base token to enhance liquidity depth. The generated LP tokens are irrevocably allocated to the fundaddress.

Critical Notes

  • Buy Tax Limitation: Buy Tax rate must be <25%

  • Sell Tax Limitation: Sell Tax rate must be <25%

  • Zero-Value Requirement: Set unused tax categories to 0 (all fields are mandatory)

  • FundFee Enforcement: FundFee must be ≥ 0.01%

Generations Rewards (Total 100%)

  • Inviter Fee: The percentage of trades fees allocated to upline rewards. Example: 2% means 2% of each trades is distributed to uplines.

  • Generations: The number of downstream levels that can be rewarded. Currently, up to 16 levels can be set.

  • Tier Ratios:

    • fristRate:The percentage of the Referral Tax allocated to the direct upline. Example: 20% of a 2% Referral Tax = 0.4% total trades fee.

    • secondRate:Percentage allocated to the upline's upline (second-tier).

    • thirdtRate:Percentage allocated to the upline's upline's upline (third-tier).

    • leftRate:Click "Calculate Ratio" to auto-distribute remaining percentages across subsequent generations.

  • ⚠️ Critical Rule: All generation ratios must sum to 100%. Use the "Calculate Ratios" button for automatic compliance.

Fundaddress

  • This is the address that receives the fundfee. If the base pool is a USDT pool, it will receive USDT; if the base pool is a BNB pool, it will receive BNB.

Advanced Controls

  • Select DEXs: Match chain (BSC → PancakeSwap, ETH → Uniswap).Choose the correct exchange where you will add liquidity. An incorrect selection may cause the mechanism to fail.

  • Select Currency: Base Pool Token,BNB/USDT/USDC etc.

3. Feature Toggles

Below are explanations for the various token function switches:

Function
Enabled
Disabled

Off Trade

Requires manual activation (irreversible)

Auto-trading post-liquidity addition

Kill Block

Blocks sniper buys (e.g., 3 blocks = ~9s on BSC)

Permanently disabled

Cahnge Tax

Allows post-deployment tax modifications

Locked permanently

Airdrop

Randomly airdrops tokens (max 5 addresses per tx, irreversible)

Disabled

Blacklist

Restrict sells/transfers for flagged addresses

Permanently disabled

Enable Off Trade

  • Manual Trading Activation: Select this option if you wish to enable trading via the console. Once activated, trading cannot be turned off.

  • Do Not Select: Trading becomes available immediately after liquidity is created.

Kill Block (KB)

  • Select This Option: This is used to prevent bots from front-running buy orders. For example, “kill 3 blocks” means that addresses buying within the first 3 blocks (approximately 9 seconds on BSC) will be automatically blacklisted.

  • Do Not Select: This function will be unavailable and cannot be enabled later.

Enable Cahnge Tax

  • Select This Option: Allows you to manually adjust the tax rates after creating the token; both buy and sell tax rates must be less than 25%.

  • Do Not Select: Once the token is created, the slippage cannot be modified, and this function cannot be enabled later.

Airdrop Enable

  • Select This Option: A small amount of tokens will be automatically airdropped to random addresses on every transaction to boost holding effects, with up to 5 addresses receiving airdrops.

  • Do Not Select: This function will be disabled.

    Note: Once enabled, this function cannot be disabled or modified.

Blacklist

  • Select This Option: Allows you to add or remove addresses from the blacklist. Addresses on the blacklist will be unable to sell or transfer tokens. Use with caution.

  • Do Not Select: Blacklist settings cannot be configured or removed.

4.Console Usage Instructions

Ownership Control

  • Transfer Ownership: Transfer the contract ownership to another address. (Before transferring, be sure to copy the console URL. The new ownership address must use the console URL to access the console.)

  • Renounce Ownership: Irreversible privilege discard

Liquidity Controls

  • Remove LP fee:

    • Default 0% (BNB pools require wBNB for tax-free operations)

    • Remove-LP Tax: Max 25%

Trading Controls

  • Launch: Enable Trading.Once enabled, users can trade. This function cannot be disabled once activated.

  • Set Blacklist: Allows you to add or remove multiple addresses from the blacklist.Blacklisted addresses will not be able to transfer or sell tokens

  • Kill bots: Prevent Front-Running Bots at Launch.Mainly used to modify the kill block setting, applicable for projects that have not yet launched.

Tax rate control

  • Modify Tax : You can adjust the liquidity (return), fundaddress, dividend, and burn tax rates individually. Their total must be less than 25%.

  • Set Fee Whitelist: Transactions from whitelisted addresses are exempt from tax. You can add or remove addresses in bulk.

  • Set Fundaddress: Change the contract’s fundaddress.

Dividend control

  • Set Claim: Withdraw any undistributed reward tokens remaining in the contract address.

  • Set Exclude Holder: Set Reward Blacklist.Addresses added to this blacklist will not receive LP Reflection rewards.

  • Set Holder Reward Condition Rewards will be distributed when the reward tokens (e.g., USDT) held in the smart contract exceed this threshold. The default threshold is 0.1 reward tokens. Setting this value too high may result in extended periods without reward distributions. New users are strongly advised against modifying this parameter.

Change InviterFee control

  • Change Inviter Fee: Adjust the inviter tax for both buy and sell trades; the total combined with other taxes must be less than 25%.

  • Set referral Rewarde Ratios: Configure the rewarde ratios for inviter rewarde using the same method as described above. If you are unsure of the calculations, click “Calculate Ratio” to have it automatically computed.

  • Set Minimum Transfer Amount: For example, if the minimum transfer amount is set to 0.1, the upstream user must transfer at least 0.1 tokens to the downstream user, and the downstream user must return at least 0.1 tokens to bind the inviter relationship. (It is recommended that this value be set to less than 0.1.)

FAQs

1.Transferred LP Addresses:

  • LP tokens received via transfer (not self-provided liquidity) require 1 buy + 1 sell transaction to activate reward eligibility.

  • Unactivated addresses remain unrecognized by the contract and earn no rewards.

2.Inability to Set Liquidity Addition Tax?

  • Considering overall user needs, the default template does not charge a fee for adding liquidity; this cannot be modified, though the removal tax can be adjusted.

3.Locked LP & Reward Eligibility

  • 🔒 Locked LP Addresses: Earn no rewards (excludable via .console)

  • ⚖️ Non-Locked Participants: Continue receiving rewards unaffected.

4.Ownership Transfer Protocol

  1. Pre-Transfer Action: Copy the dashboard link (visible via the "Copy Link" button).

  2. New Owner Access: Transferred addresses must use the copied link to access the dashboard.

5.LP Fee Exemption Rules

Base Pool
Fee-Free Conditions

USDT

Matching token pairing direction (e.g., USDT/token order must align with initial pool creation)

BNB

Use wBNB with consistent pairing direction

Violating these conditions incurs add/remove LP fees.

6.Testnet Configuration (BSC Testnet)

  • Testnet USDT Contract: 0x66e972502a34a625828c544a1914e8d8cc2a9de5

7.V2 vs. V3 Liquidity:

When adding liquidity on PancakeSwap for the first time, you must create a V2 pool; V3 pools are not supported as they do not support any of the mechanisms. Please take note.

PreviousLP Reflection Token Ceration GuideNextBurning Reflection Token Ceration Guide

Last updated 1 month ago

Was this helpful?

1.Open

Navigate to: Click "Connect Wallet" at top-right

After successfully connecting to the wallet, we fill in the corresponding parameters on the token creation page:

After successfully creating your token, you can enter the console to manage its various functions. Open the console at and adjust the following settings:

PancakeSwap Testnet:

If you have any questions or require further clarification, please join our official Telegram group:

⛓️
4️⃣
PandaTool
https://www.pandatool.org/#/coinrelease/LPwithInviter?lang=en-US
https://www.pandatool.org/#/coinrelease/LPwithInviter?lang=en-US
https://www.pandatool.org/#/coinrelease/console?lang=en-US
https://pancakeswap.finance/swap?chain=bscTestnet
https://t.me/pandatool_en