PandaTool一键发币
🇺🇸_English
🇺🇸_English
  • 🐼Introduction
  • 📞Connect
  • 🧭Navigation
  • 💸Tools Fee
  • ⛓️EVM Create Token
    • 1️⃣Create standard ERC20 or BEP20 token Guide
    • 2️⃣Holders Dividend Token Creation Guide
    • 3️⃣LP Reflection Token Ceration Guide
    • 4️⃣LP Reflection Pro Token Ceration Guide
    • 5️⃣Burning Reflection Token Ceration Guide
    • 6️⃣ERC314 Protocol Token Creation Guide
    • 7️⃣Holders Interest Token Creation Guide
    • 8️⃣Holders Reflection Token Creation Guide
    • 9️⃣Reserve Burn Token Creation Guide
    • 🔟LP Mining Token Creation Guide
  • 🛠️Solana Tools
    • ⛏️Solana Token Creator Guide
    • 💊Launch Tokens On PumpFun and Bundle Buys Guide
    • 🔥Guide to Burning LP Tokens on Solana
    • 📤Solana Batch Sender or Airdrop Guide
    • 📥Solana Token Batch Consolidation Guide
    • 🆕Create Solana Tokens Presale and Private Sale Guide
    • 1️⃣Create Solana Raydium Liquidity Pool Guide
    • 2️⃣Add or Remove Liquidity On Raydium Guide
    • 3️⃣Creating OpenBook Market ID Guide(Cheapest)
    • 4️⃣Pump Batch Sell All Tokens Guide
    • 5️⃣Burning Solana SPL Token or LP Guide
    • 6️⃣Set Solana Token Authority: Minting, Freezing, and Removing
    • 7️⃣Solana Tokens Update Metadata Guide
    • 8️⃣Bulk Generation of Solana Wallet Addresses
    • 💸Solana New Address Buy Bot Tutorial
    • 💰Solana Account Rent Recycling Tutorial
    • 📙Solana OpenBook Market ID Query Guide
    • 🆕Solana Guide to Creating Raydium CLMM Pool
  • ⚒️Evm Tools
    • 📤Multi-chain Bulk Token Transfer Tools Guide
    • Bulk Wallet Generator Guide
  • 🎁Create Presale Tools
    • 💁‍♂️Decentralized Mint Presale Creation Guide
    • 🙋‍♂️Liquidity-Backed Mint Presale Creation Guide
    • 🙆‍♂️Donation Presale Creation Guide
  • TON Token Creator
    • TON Token Creator Tutorial
    • Tonkeeper wallet installation tutorial
    • Tutorial on creating liquidity pool on STON.fi
    • Tutorial on creating liquidity pool on DeDust
  • Declaration
    • Terms of Service
    • Disclaimer
Powered by GitBook
On this page
  • Protocol Mechanics
  • Core Features
  • Reserve Burn Mechanism
  • Key Parameters:
  • Presale Mechanism (Mint)
  • Reserve Burn Token Creation Steps
  • 1. Wallet Connection (Axperienced users may skip)
  • 2. Parameter Configuration
  • 3. Feature Toggles
  • 4.Console Usage Instructions
  • FAQs

Was this helpful?

  1. EVM Create Token

Reserve Burn Token Creation Guide

Burns tokens, raising price as paired asset supply (e.g., USDT/BNB) remains constant.

Protocol Mechanics

Core Features

  • 💹 Reserve Burn: Destroys tokens from the pool, raising the price as the other paired token(e.g.,USDT or BNB) supply stays constant.

  • 🤝 Mint: Users send BNB to contract address → Receive your token at preset rates

Reserve Burn Mechanism

  • Periodically burns tokens (i.e. your‑cerated token) from the liquidity pool, increasing token price as the paired asset (e.g., BNB/USDT) remains constant.

Key Parameters:

  • Burn Cycle: 1-48 hour intervals

  • Burn Rate: 0.01% - 1% per cycle

  • Activation: Requires non-whitelisted sell activity(In each cycle)

  • Termination: Auto-stops when pool balance ≤100 tokens

Presale Mechanism (Mint)

Users send BNB → Receive your token at preset rates

  • Mint Concept Mint refers to a process where a user sends BNB to the contract address, and in return, the contract issues tokens to the user based on a preset ratio. This mechanism allows the project team to achieve a form of private placement before trading opens.

  • How Mint Begins? After the project create tokens, a certain number of tokens are transferred into the contract address. Users can then send BNB into the contract to start minting.

  • How Mint Ends? Minting will automatically end when the project adds liquidity and manually opens trading, or when the total mint shares reach the preset total.

  • How to Withdraw the Minted BNB? There is a function in the console called “Claim Contract Tokens” that allows the ownership address to withdraw BNB.

Reserve Burn Token Creation Steps

2.Select the Reserve Burn template

3.Connect Wallet

4.Token Parameter Configuration

5.Create Contract

6.Setting up token functionality

1. Wallet Connection (Axperienced users may skip)

Step 1 - Network Selection

In MetaMask:

  • Select target blockchain (e.g. BSC for Binance Smart Chain)

  • Switch networks using the network dropdown

Step 2 - Platform Access

Step 3 -Wallet Connection Process

  1. MetaMask pop-up appears → Select desired account

  2. Click "Next" → "Confirm"

  3. Verify connection status via displayed chain name & wallet address

Important Notice: If your Google Chrome has multiple wallet extensions installed (Phantom Wallet, MetaMask, and OKX Web3 Wallet), PandaTool will prioritize connecting to Phantom Wallet by default. To prevent this, temporarily disable the Phantom Wallet extension in your Google Chrome settings.

2. Parameter Configuration

Core Settings

  • Name: Full designation (e.g., Ethereum)

  • Symbol: Ticker (e.g., ETH)

  • Total Supply: Fixed issuance (non-inflationary)

  • Decimals: Fixed at 18

Mint Settings

  • Amount Per Units: Tokens allocated per Mint slot(single address may mint multiple times and shares)

  • Mint Limit: Maximum allocatable slots(Amount Per Units x Mint Limit ≤ Total Supply)

  • Price: BNB required per slot (excess refunded)

  • No Mint:If you do not wish to enable Minting, simply enter arbitrary parameters, and do not transfer any tokens to the contract address after creation.

Burn Settings

  • lpBurnFrequency: Burn Cycle (hours),The frequency of burns; you can set it to a maximum of 48 hours.

  • lpBurnRate: Burn Percentage, The percentage of tokens in the reserve to burn each cycle (minimum 0.01%, maximum 1%).

Buy Tax (Total <25%)

  • Buy Fund Fee: Each buy transaction deducts a percentage of tokens deposited into the contract address. When the accumulation threshold is reached, these tokens are automatically swapped for USDT (or the base pool token matching your liquidity pool,such as bnb or USDC) and sent to your fundaddress.

  • Buy Burn Fee: Each buy transaction deducts a percentage of tokens permanently sent to the Burn Address (0x000...dead) for deflationary removal.

  • Buy LP Fee: Each buy transaction deducts a percentage of tokens deposited into the contract address. Upon reaching the activation threshold, these tokens are automatically paired with the base token to enhance liquidity depth. The generated LP tokens are irrevocably allocated to the fundaddress.

Sell Tax (Total <25%)

  • Sell Fund Fee: Each Sell transaction deducts a percentage of tokens deposited into the contract address. When the accumulation threshold is reached, these tokens are automatically swapped for USDT (or the base pool token matching your liquidity pool,such as bnb or USDC) and sent to your fundaddress.

  • Sell Burn Fee: Each Sell transaction deducts a percentage of tokens permanently sent to the Burn Address (0x000...dead) for deflationary removal.

  • Sell LP Fee: Each Sell transaction deducts a percentage of tokens deposited into the contract address. Upon reaching the activation threshold, these tokens are automatically paired with the base token to enhance liquidity depth. The generated LP tokens are irrevocably allocated to the fundaddress.

Critical Notes

  • Buy Tax Limitation: Buy Tax rate must be <25%

  • Sell Tax Limitation: Sell Tax rate must be <25%

  • Zero-Value Requirement: Set unused tax categories to 0 (all fields are mandatory)

  • FundFee Enforcement: FundFee must be ≥ 0.01%

Tax Type
Functionality

Fund Tax

Tokens → Converted to base pool asset (BNB/USDT) → Sent to fundaddress.

Burn Tax

Tokens → Permanently destroyed via Burn Address (0x000...dead).

Liquidity Tax

Tokens → Auto-added to LP → LP Tokens sent to fundaddress.

Fundaddress

  • This is the address that receives the fundfee. If the base pool is a USDT pool, it will receive USDT; if the base pool is a BNB pool, it will receive BNB.

Advanced Controls

  • Select DEXs: Match chain (BSC → PancakeSwap, ETH → Uniswap).Choose the correct exchange where you will add liquidity. An incorrect selection may cause the mechanism to fail.

  • Select Currency: Only BNB pools are supported.

3. Feature Toggles

Below are explanations for the various token function switches:

Function
Enabled
Disabled

Off Trade

Requires manual activation (irreversible)

No

Kill Block

Blocks sniper buys (e.g., 3 blocks = ~9s on BSC)

Permanently disabled

Cahnge Tax

Allows post-deployment tax modifications

Locked permanently

Airdrop

Randomly airdrops tokens (max 5 addresses per tx, irreversible)

Disabled

Blacklist

Restrict sells/transfers for flagged addresses

Permanently disabled

Enable Off Trade

  • Must Select It: This function requires you to manually enable trade via the console.

Kill Block (KB)

  • Select This Option: This is used to prevent bots from front-running buy orders. For example, “kill 3 blocks” means that addresses buying within the first 3 blocks (approximately 9 seconds on BSC) will be automatically blacklisted.

  • Do Not Select: This function will be unavailable and cannot be enabled later.

Enable Cahnge Tax

  • Select This Option: Allows you to manually adjust the tax rates after creating the token; both buy and sell tax rates must be less than 25%.

  • Do Not Select: Once the token is created, the slippage cannot be modified, and this function cannot be enabled later.

Airdrop Enable

  • Select This Option: A small amount of tokens will be automatically airdropped to random addresses on every transaction to boost holding effects, with up to 5 addresses receiving airdrops.

  • Do Not Select: This function will be disabled.

    Note: Once enabled, this function cannot be disabled or modified.

Blacklist

  • Select This Option: Allows you to add or remove addresses from the blacklist. Addresses on the blacklist will be unable to sell or transfer tokens. Use with caution.

  • Do Not Select: Blacklist settings cannot be configured or removed.

4.Console Usage Instructions

Ownership Control

  • Transfer Ownership: Transfer the contract ownership to another address. (Before transferring, be sure to copy the console URL. The new ownership address must use the console URL to access the console.)

  • Renounce Ownership: Irreversible privilege discard

Mint control

  • Set Price Per Share: Modify the BNB fee for each mint share (tokens will be created in whole multiples based on the maximum integer, with any excess BNB refunded).

  • Set Quantity Per Share: Modify the number of tokens created per mint share (there is no limit per address).

  • Set Max Quantity: Modify the total number of mint shares available (adjust based on the actual progress of Mint).

  • SetClaim: Withdraw BNB,Extract presale funds via "Claim Contract Assets"

Liquidity Controls

  • Add/Remove LP Tax:

    • Default 0% (BNB pools require wBNB for tax-free operations)

    • Max 25% (Add-LP), 100% (Remove-LP)

Trading Controls

  • Launch: Enable Trading.Once enabled, users can trade. This function cannot be disabled once activated.

  • Set Blacklist: Allows you to add or remove multiple addresses from the blacklist.Blacklisted addresses will not be able to transfer or sell tokens

  • Kill bots: Prevent Front-Running Bots at Launch.Mainly used to modify the kill block setting, applicable for projects that have not yet launched.

Tax Rate Control

  • Modify Tax : You can adjust the liquidity (return), fundaddress, dividend, and burn tax rates individually. Their total must be less than 25%.

  • Set Fee Whitelist: Whitelisted addresses are exempt from taxes. You can add or remove addresses in bulk.

  • Set Fundaddress: Change the contract’s fundaddress.

Burn Control

  • Modify Burn Percentage: Adjust the percentage of tokens to burn during each cycle.

  • Modify Burn Cycle: Adjust the duration of each burn cycle.

FAQs

Why No Reserve Burn Occurred?

  • Timing Not Met: The first burn triggers after the first valid sell transaction within the initial cycle post-trading activation. Example: With a 1-hour cycle starting at 9:00 PM, burns begin only after 10:00 PM upon the first valid sell.

  • No Valid Sell Activity: Burns are skipped if no non-whitelisted sells occur within a cycle.

  • Whitelisted Seller: Sells from whitelisted addresses (e.g., project team wallets) do not trigger burns.

Can I Renounce Contract Ownership Immediately?

  • Do not rush to renounce Ownership. Wait until you have extracted the minted BNB, added liquidity, and opened trading with confirmed tax rates before considering renouncing ownership.

How Does Mint Start and End?

  • After token creation, the project team should transfer a sufficient number of tokens (ideally exceeding the total Mint allocation) to the contract address to enable Minting. Minting will automatically end once liquidity is added and trading is manually opened.

Presale Best Practices

  • Deposit tokens ≥ Total Slot allocation to activate Mint

  • Terminate Mint by enabling trading or exhausting slots

What If I Do Not Want Mint?

  • Simply enter arbitrary Mint parameters during token creation and do not transfer any tokens to the contract address. Then, proceed to add liquidity and open trading; Minting will not occur.

What Causes Mint Failures?

  • Price Issue: If the BNB amount sent by the user is lower than the price per share, the transaction will fail and the BNB will be returned.

  • Gas Issue: Insufficient gas fees may lead to a Mint failure.

  • Insufficient Token Supply: If the contract address does not hold enough tokens for Minting, the Mint transaction will fail.

Batch Minting vs. Actual Mint Shares:

Full multiples: 0.06 BNB (2 slots) → 2x tokens

  • For example, if 1 share equals 100 tokens and the price per share is 0.03 BNB, then a user sending 0.06 BNB will receive 200 tokens; 0.09 BNB will yield 300 tokens, and so on.

Partial amounts: 0.07 BNB → 2x tokens + 0.01 BNB refund

  • Using the same parameters, if a user sends 0.04 BNB, they will receive 100 tokens with 0.01 BNB refunded; 0.05 BNB will yield 100 tokens with 0.02 BNB refunded; 0.07 BNB will yield 200 tokens with 0.01 BNB refunded. The contract automatically issues tokens in the maximum whole number multiples and refunds any excess.

Can Mint Be Performed Using wBNB or USDT?

  • Not supported; currently, only BNB is accepted. If a user sends USDT or any other token to the contract address, it cannot be withdrawn.

How Does a New Ownership Address Access the Console After Ownership Transfer?

  • Before transferring ownership, copy the console URL (a button at the top of the console allows you to copy the link). After the transfer, the new ownership address can access the console using that URL.

Testnet Configuration (BSC Testnet)

  • Testnet USDT Contract: 0x66e972502a34a625828c544a1914e8d8cc2a9de5

V2 vs. V3 Liquidity:

  • When adding liquidity on PancakeSwap for the first time, you must create a V2 pool; V3 pools are not supported as they do not support any of the mechanisms. Please take note.

LP Fee Exemption Rules

Base Pool
Fee-Free Conditions

USDT

Matching token pairing direction (e.g., USDT/token order must align with initial pool creation)

BNB

Use wBNB with consistent pairing direction

Violating these conditions incurs add/remove LP fees.

PreviousHolders Reflection Token Creation GuideNextLP Mining Token Creation Guide

Last updated 1 month ago

Was this helpful?

1.Open

Navigate to: Click "Connect Wallet" at top-right

After successfully connecting to the wallet, we fill in the corresponding parameters on the token creation page:

After successfully creating your token, you can enter the console to manage its various functions. Open the console at and adjust the following settings:

PancakeSwap Testnet:

If you have any questions or require further clarification, please join our official Telegram group:

⛓️
9️⃣
PandaTool
https://www.pandatool.org/#/coinrelease/LPBurn?lang=en-US
https://www.pandatool.org/#/coinrelease/LPBurn?lang=en-US
https://www.pandatool.org/#/coinrelease/console?lang=en-US
https://pancakeswap.finance/swap?chain=bscTestnet
https://t.me/pandatool_en